custom hardware

What To Consider When Choosing Door Handles For A Home Renovation

A lot will depend on how you are planning to use the door handles, questions you may want to consider;

1.     How many doors are you planning to re-furbish - is this a statement piece for an entry door or are there several doors where you will be using the same style of design?

2.     How eclectic are you? Do you like to continue a particular style through the entire home or do you like to mix and match styles?

3.     Is the door exterior or interior - if an exterior door, is it protected from the elements or will it be exposed to rain, snow or sea spray as these will contribute to the corrosion and rust of the handle. While bronze does not rust, it will over time develop a patina and is often referred to as a “living finish”. Stainless steel is corrosion resistant and while not rust proof, 316 stainless steel is the preferred alloy for coastal properties exposed to sea water.

4.     Does the door need to lock - and does the door handle manufacturer provide the handles you are considering for all types of function from locking front and privacy doors to non-operating "dummy" handles that are typically fixed and often used to complete the symmetry for example of double doors where one handle operates to open and close the door and the “dummy” handle is used more as a grip or pull.

5.     Are there special needs - to consider making it important that the door handle be easy to grip and that levers not be too heavy to depress

6.     Are your doors unusual -  are they extremely deep or shallow, bare in mind that a typical door in the US is 1 3/4" to 2" thick and while many handles can accommodate other depths, the manufacturer may have an up charge to create shorter or longer spindles or through bolts.

7.     Unforeseen charges to consider -  the  lock is often not included in the cost of the door set but this varies with manufacturer, for example  we do include the costs for tubular latches but not the cost of the mortise lock made by Accurate.  The installation of a door set, particularly one that locks, will need to installed either by a contractor or locksmith.

Different Ways To Remodel Your Dining Room

When planning to remodel a room many of us begin with the color scheme and build our design from there. While this is admirable it may also unwittingly turn us into trend followers. So what other approaches are there?

Much will depend on the scale of the makeover, is it the entire home or is the scope limited to the social areas of the home such as the dining and living room, or the more personal areas like the master bedroom and bathroom.

Re-upholster chairs that are worth saving

Re-upholster chairs that are worth saving

For the purposes of this piece I will focus on the dining room. As mentioned in a previous post, both ends of the age spectrum from the millennials to the baby boomers are moving into smaller homes and making use of more flexible spaces. Hopefully, the dining room as a place to relax and enjoy meals with friends has not fallen victim to this scaling down and still exists as an area demarcated from the rest of the home. If so, look at the furniture and determine whether it can be revived. As furniture makers we are fortunate in having chairs that we made from solid walnut and that were intended to last if not forever, at least for a few lifetimes and that have over the years been easily revamped by new upholstery. If your chairs are worth saving  and are made of solid wood or metal then they can be revived by re-finishing the frame and by re-upholstering the seat or back. If you live in Los Angeles you should have no problem in finding a furniture finisher or upholster but if you are not familiar with how to order fabric what yardage to use, or footage to buy if using hide, then I strongly recommend working with an interior designer. The designer will be able to guide you through the maze of questions about which fabrics need to be backed, how much fabric you will need depending on the pattern repeats of the fabric, whether the chairs should re-sprung and if so whether coil and spring is a better option for your chair frame than webbing.

Replace the cabinet knobs for the defining touch

Replace the cabinet knobs for the defining touch

The dining room can also be remodeled by focusing onbuilt-in cabinets. Built-ins are a common feature regardless of the age of the home and can be revived by re-painting or re-varnishing the doors and frames or by removing the doors to create an open cabinet either with or without shelving. This is how I plan to revamp my dining room and to add the defining touch I will be replacing the cabinet knobs.

Having The Right Door Pull - The Benefits of Working With An ASID Designer

We were recently featured in the Los Chapter of the ASID magazine and want to share with our readers the benefits of working with a creative designer, like Bonnie McIntyre.  Working with a professional designer is especially important when a home owner is choosing custom door hardware for their existing home that needs renovation.  Bonnie began the project by reviewing Martin’s wide range of hardware designs and assessing each style as to its scale, design aesthetic and compatibility with her client’s existing front door. The client, a keen birder, loved Martin’s woodpecker door knocker and so Bonnie continued this natural theme by taking the bark texture of the mounting plate for the door knocker and using it as back-plate for the door set.  The result of this collaboration was a custom one of a kind willow bark door set.

 

One of a kind custom door set in bronze

One of a kind custom door set in bronze

The Willow series was continued into the renovated kitchen where Willow cabinet knobs and Hedgerow  pulls were nickel plated and gently oil rubbed with a dark patina to create a sophisticated finish and one that paired well with the pewter faucets and steel range.

The transition from the kitchen to butler’s pantry and then to the breakfast room was a point of departure and here more whimsical bunny knobs were used for the passageway doors.

While the project was very satisfying to all who were involved, had it not been for Bonnie McIntyre’s creative restraint and her amazing eye for the smaller finer details I do not think we could have created a space that was both sophisticated and soothing.

Hawaiian Door Pull

We have added a new cabinet door pull to our animal and bird collections and have used the inspiration of Hawaiian birds and fauna to create this piece. The pull is substantial in scale measuring 12” high and 3” wide and can be used either for large cabinet doors or for interior doors.  It is cast in solid bronze and made using the lost wax method of casting which allows us to achieve incredible detail and fluidity in design that is difficult to achieve by other casting methods.

The pull is a fusion of bird, vine stem and even human features all of which flow together to create an abstract mythical piece.  The pattern for this piece was sculpted in wood and was carved as a 3 dimensional sculpture, both sides having the same design. In the picture we are showing 2 pieces and  by turning the piece over we are able to create pulls that are the mirror image of each other. The mounting posts are attached after the casting has been made and so on this occasion we were too able to create a left and a right pull using one pattern and one mold.

We have named this new addition the “Grand Hawaiian” pull to distinguish it scale wise from the single and double-headed  bird pulls in the same collection.  If you are looking to use other Hawaiian inspired cabinet pulls we also have an orchid stem and bamboo design  to complete your  tiki dream room.

 

Spotlight on architectural hardware collections at Martin Pierce---Morphic

One of the more popular lines of architectural hardware at Martin Pierce Hardware is our Morphic collection.  One look at the sleek design and interesting texture of these pieces and it is easy to understand it's popularity. Morphic in brushed finish

 

On our website we describe it this way: "Fluid contemporary designs are the basis for this innovative style of decorative door hardware. Cast in steel, these hardware pieces are extremely contemporary but when cast in bronze the effect is reminiscent of the Art Nouveau style."

The openwork design of this grouping makes it the perfect candidate for innovative customization options like the addition of a powder coated color:

Morphic cylindrical pull with a hot orange powder coated accent from Martin Pierce Hardware

or an LED lighting feature that will be debuted at this years HD Expo in Las Vegas, Nevada.  This collection also underwent some color and form changes for the new Baha Mar Resort in the Bahamas.  More on this exciting project to come.

The collection also includes large and small pulls for cabinetry and furniture, passageway knobs, entry way levers that can be adapted to meet ADA standards and our majestic entry door pulls that will make a great first impression to all who enter a residence, hotel, spa or other hospitality project.  Here is a sampling of the collection:

Large pull from the Morphic collection at Martin Pierce hardware Los Angeles, CA  90016

Heroic door pull from Morphic collection at Martin Pierce hardware Los Angeles CA  90016

To view the entire Morphic and other collections of custom hardware, please visit our site at www.martinpierce.com.

Designers please stop by our showroom at:

5433 W. Washington Blvd.

Los Angeles, Ca  90016

323 939 5929

Our location at the 2015 HD Expo

HDExpoVendor It is hard to believe that the 2015 HD Expo is exactly 60 days from today!  The first quarter of this year has just flown by what with preparations for the Expo as well as working on other projects.

We have been assigned our booth location.  You can find us in booth #2277  in the Exhibitor's Hall.   We are excited to share with you some new products (more on these later) as well as display some of your favorites from past shows.  Suffice it to say our Morphic Heroic door pull has undergone some amazing changes!

As we have done in past shows, we will be awarding to the first ten visitors to our booth one of our silver plated orchid cabinet knobs.  Pretty and feminine and wonderfully detailed, this knob will add an elegant touch to your home or office.

Orchid cabinet knob from Martin Pierce Hardware Los Angeles Ca  90016

And be sure and check out our new lighting collection that we are debuting at this year's Expo.  Game of Thrones fans will enjoy the new designs.

To view many of our architectural hardware collections, please visit our site at www.martinpierce.com.

Designers can visit our showroom located at:

5433 W. Washington Blvd.

Los Angeles, CA  90016

323 939 5929

A look back at past giveaways at the HD Expo

We recently announced that the first ten visitors to our booth in the Exhibitor's Hall at the 2015 HD Expo will receive one of our exquisitely detailed silver plated orchid drawer pulls to use as they please. Silver plated orchid knob from Martin Pierce Custom Hardware Los Angeles CA  90016

We have made it a tradition to award a piece of our custom hardware each year we attend the HD Expo.  We thought it might be fun to revisit past giveaways:

In 2014 we awarded twenty lucky visitors to our booth their choice of either the whimsical dragonfly pull or our small scarab beetle pull.

dragonfly drawer pull from Martin Pierce Hardware Los Angeles, CA  90016

Small scarab pull from Martin Pierce Hardware Los Angeles CA  90016

Small scarab pull from Martin Pierce Hardware Los Angeles CA 90016

The spring of 2013 found us delighting ten lucky winners with our beautifully detailed butterfly pull.

Small butterfly pull with hot amber patina created by Martin Pierce custom hardware

Our new at the time bronze daisy pull was chosen as the giveaway for the 2012 HD Expo.

Daisy pull from Martin Pierce Hardware Los Angeles California 90016

And it all started with the fun polished brass frog pull we awarded to the first ten visitors to our booth during our inaugural visit to the 2011 HD Expo.

Frog pull in polished brass from Martin Pierce Hardware Los Angeles CA  90016

Were you one of the lucky winners?

To view all of these items or our entire collection of architectural hardware, please visit our site at www.martinpierce.com.

Designers, please stop by our showroom located at:

5433 W. Washington Blvd Los Angeles CA 90016

Tel: 323 939 5929

Enjoy a virtual tropical vacation with our nature inspired door hardware

                                    Tropical Patio by New York Architects & Building Designers Ike Kligerman Barkley
While many of you across the U.S. and Canada are digging yourselves out of yet another winter storm we are continuing to bask in unseasonably warm weather here in Southern California.  I don't share this to make you feel bad but, rather, to introduce you to some of our custom hardware collections that will have you dreaming of blue skies and warmer climates.

Few places on earth have the variety of foliage and flowers as Hawaii.  The islands are alive with colorful hibiscus, the state flower, leafy green ferns, elegant orchids, fragrant plumeria and exotic protea.  We designed our orchid pull in silver plate that offers the ultimate in luxury for a client's island home.

The height of elegance, Martin Pierce's silver plated orchid stem pull.  Notice all the grooved areas. Martin Pierce Hardware

Along with amazing beaches and the unbelievable landscape, the islands are also alive with tropical birds and other native animals that have sparked fun and mysterious folk-lore tales.  Along with the orchid pull, we designed a whimsical version of a Hawaiian bird to be installed on the same property.

Hawaiian bird knob from the Hawaiian custom hardware collection of Martin Pierce hardware

To compliment this truly bespoke collection our Animal grouping features lizards, geckos, frogs and other tropical creatures that all signify warmer weather ahead.

To begin your virtual tropical vacation you can view our entire collection of architectural hardware at www.martinpierce.com.

The amazing future of 3D printers and how we use them

We recently attended the 3D Printer World Expo held at the Marriott convention center in. Burbank California, which was very interesting and enlightening. At present Martin is sculpting and creating the old fashioned way:

  • Sketch by hand an idea showing it from 3 perspectives or elevations.
  • Draw over each elevation on a 1"x 1" square grid
  • Toy chest drawing by Martin Pierce Hardware

  • Use a sheet of tracing paper to make a grid that is twice as big as the first grid i.e. 2" x 2" squares to make our initial sketch twice as big by free hand drawing the same lines on the bigger grid  and so on for all the grid sections. We will continue this process for all 3 perspectives.
  • We then take the tracing paper elevations or perspectives and trace them onto a block of wax or wood
  • Finally we begin to shape the piece with cutting tools, basically bandsaws, chisels etc.

As far as I can tell, this "old-fashioned" grid concept is at the heart of 3D printing and 3D scanning. We have all seen enough movies or games where we see a human head mapped out on a rotating grid and then the model gains life with skin and muscle being digitally added. So it was fun and enlightening to see some of these model making and scanning machines in action.

Gil Bruvel had some really interesting sculptures on display:

Gil Bruvel sculpture titled Oracle

Gil Bruvel sculpture titled  River photo by Martin Pierce Hardware

What ideas did we take away and what lessons were learnt?

COST and LEARNING CURVE The 3d scene is becoming more affordable.  The base price of a 3D printer, for example the creatorbot-3d machine,  is priced at $1,845 and will print a piece in polycarbonate or nylon that is 12"w x 12"d x 18"h.  Not bad but you will also need to be able to "build" the stl file that "runs" the printer or issues the instructions or code that determines how it moves and releases jets of polycarbonate to create  the shape of the piece you want to make. To be good at this you will need to learn a program like zbrush or maya or  Sketch up. The first 2 programs run anywhere from $699 to $2000 plus but Sketch up is free. If, like me, you find an on-line tutorial difficult there is a 40 hour course for $1500 available.  BUT whether these costs add up will depend on how you can use what is printed.

PATTERN MAKING If you are starting from scratch and do not have drawing and sculpting skills then yes, 3D printing and modeling are good options. However, for us the learning curve is too long and the output too slow when compared to old fashioned carving and modeling. When Martin has a new concept he is able to draw it very quickly from at least 3 perspectives. He can make a rough model in modeling foam to see if the actual piece in reality is still attractive and at that point can make changes. By comparison, if he created a 3D file it would take him a long time to create the file as his keyboard and mouse skills are slow, it would also take as much as 12 hours to print the piece.  If he then wanted to change it he would have to go back to his digital file and work at his snail pace to make the changes and then spend again up to 12 hours printing it. This process may have to be repeated several times.

MAKING A FINISHED PRODUCT There are some 3D printers that can print metal using essentially fine metal flakes that are mixed in a polymer so the end result is at best a metal hybrid.  Not an option for Martin as we cast our bronze door handles in SOLID silicon bronze and likewise our contemporary door handles using SOLID 316 stainless steel. Both metals are dense, not porous, and have great durability.  They stand on their own as metals and do not need to be plated.  316 Stainless steel is also one of the most corrosive resistant metals around.  We value the inherent beauty of solid bronze and solid steel and both give us the mediums we need to create beautifully crafted heirloom hardware.

HOW WE USE THE TECHNOLOGY We are currently using this technology to scan simple shapes like our new Dragon egg.   Martin turned it on a lathe to create a solid egg shape in wood approximately 14" long by 6" in diameter. To hollow out the wooden egg would have taken Martin 2 to 3 days so we chose to work with a  3D scanning company who scanned the egg and then created an stl file in which they made the egg hollow with a thin wall dimension of .125" . We then worked with a 3D printing company who printed the new hollow egg in a polycarbonate material. This saved us a lot of time and we will use this process again to create blank patterns. The egg has since been carved with what we hope others will agree, is fine artistry, and will be cast in solid .125" steel.  It will be our first venture into custom wall lighting and we are excited to debut it for he hospitality designers and architects who attend the upcoming 2015 HD Expo in Las Vegas.

To view our entire collection of stainless steel and bronze hardware, please visit our site at www.martinpierce.com.

2015 HD Expo, here we come!

  bronze sculpture from Martin Pierce Hardware

Like the Jaybird that inspired our latest bronze sculpture, the first month of the new year simply flew by!  But that just puts us one month closer to the 2015 HD Expo and our trip to Las Vegas, Nevada.  This will be our fourth consecutive year exhibiting at the Expo and we are, as always, looking forward to connecting with many of you.

As we get closer to the event we will be sure to share not only our location in the Exhibitor's Hall but we hope to have some custom hardware surprises that we think will please many of you who are involved in the hospitality design industry.  If you will recall, we debuted our new Morphic cylindrical entry pull last year featuring a hot patina color enhancement that adds a new dimension to this very unique item of architectural hardware.

Morphic cylindrical pull with a hot orange powder coated accent from Martin Pierce Hardware

More to come!

To view the entire Morphic collection please visit our site at www.martinpierce.com.

Wildflowers offer inspiration for custom hardware designs

We have always been intrigued by the beauty and the variety of California wildflowers and other indigenous plants, as evidenced by many of the designs in our Flora custom hardware collection. Daisy drawer pull by Martin Pierce Custom Hardware

Like many areas of the country, southern California has a wildflower season that begins sometime in the early spring.  The first blooms and the duration of the wildflower viewing season are determined by the weather, specifically the amount of rainfall the area receives during the year.  The drought continues to be in effect, even with the recent rains we have enjoyed, but we are looking forward to some cooler days and more precipitation to enhance the blooming season.  This photo, taken in May 2014 shows just how beautiful the hillsides are when the poppies take over in all their citrus colored glory!

Antelope Valley Poppy Reserve courtesy of desertusa.com

The succulents that grow in the desert also flower and require very little water in order to survive the soaring temperatures and arid conditions.  We are equally intrigued by these hardy plants and often take photos of the various species we discover on our hikes and visits to local botanical gardens.

Cacti and succulents photo by Martin Pierce Custom Hardware

Flowers are a great source of inspiration for your hospitality design projects, as evidenced by this gorgeous orchid pull designed for our client in Hawaii.

The height of elegance, Martin Pierce's silver plated orchid stem pull.  Notice all the grooved areas. Martin Pierce Hardware

If you get a chance, a trip to the local desert to see these wildflowers in bloom is definitely in order.

To view our Flora designs or our entire collection of architectural hardware, please visit us at www.martinpierce.com

Meet you over at Dering Hall

We are excited to announce that we have recently partnered with online marketplace, Dering Hall, to offer our custom architectural hardware products to designers and architects.  This partnership makes it possible for those design professionals to find custom entryway, passageway and drawer and cabinet hardware for their hospitality, commercial and residential projects. The site features a selection of our hardware including items from our Ergo and Hedgerow collections as seen in the snapshot of the webpage below:

Ergo Door knob

Product Specifications

Dimensions
Rose 3 1/2"W 1/2"D Knob 2 1/2"W 2 1/4"D 3"H
Location
Los Angeles, CA
Category
Accessories, Hardware, Knobs/Handles
Product Type
Made-to-Order
Lead Time
8-10 Weeks
Material
Stainless steel

Product Description

Our contemporary styles are cast in 316 Stainless Steel. We pride ourselves on our exceptional quality And artistry. The contours of this piece are designed to fit your hand hence the name Ergo-nomic. For a warmer tone we recommend ordering this piece in bronze.

Other pieces featured include our Hedgerow entryway door pull:

Hedgerow collection from Martin Pierce Custom Hardware

Dering Hall  best describes their services-"Dering Hall is an online marketplace for the finest interior designers, architects, artisans, and design galleries to showcase their work and sell new, high-end home furnishings and accessories."  They make it easy for discerning design professionals and homeowners alike to search for and find high-end products like furniture, fabrics, lighting fixtures and, of course, hardware.

You can view our entire collection of custom hardware at www.martinpierce.com.

HD Expo 2015

It is that time of year again--time to begin preparing for our annual trek to the HD Expo in Las Vegas Nevada.  It is very early in the process but we wanted to tease you with a few items we hope to exhibit in our booth at the Expo:

  • Last year we debuted our new Morphic cylindrical pull with the addition of a powder coated color accent added.  We continue to work with this collection by adding LED lighting and if all goes well, the debut will certainly be exciting.

Morphic cylindrical pull with a hot orange powder coated accent from Martin Pierce Hardware

  • We also hope to share at least a prototype of our hinge collection
  • While they will probably not make an appearance at the Expo, Martin is in the process of designing some very unique wall sconces and candle holders.  All we can say is that "Game of Thrones" fans will be very excited.

We will continue to keep you posted on the progress of all of these projects as we look forward to this year's HD Expo.

To view our entire collection of architectural hardware or to discuss your upcoming hospitality or residential projects, please visit our site at www.martinpierce.com.

Brass continues to be a popular interior design trend for 2015

Brass is back and in a big way.  In fact, this warm metal has been making an appearance in both residential and hospitality projects for a couple of years now.  This is not the gaudy brass of the seventies but a softer version that is beautiful in both matte and shiny finishes. And it is being seen throughout the interior design industry in furniture, lamps, hardware and accessories.  Here is just a glimpse of what is out there. You can make a bold statement in the bedroom with this new bed from Taylor Burke Home featuring a brass frame and upholstered insert.

Brass headboard from Taylor Burke Home

Highly polished or left in its natural state and allowed to patina over time, brass fixtures offer a welcome option from chrome, stainless, nickel and bronze finishes that have been popular for so long.

While we do appreciate the look that brass offers, we do not work with brass.  It is a soft and porous metal that will tarnish and flake off over time and certainly not give you a lifetime product. We do, however, offer a high polished bronze finish (shown below) that provides a high shine and warm golden tone similar to brass but with the added benefit of being a strong metal that will not flake or peel off, tarnish etc.

frog pull from Martin Pierce Custom Hardware available in multiple finishes

Contact us to discuss your architectural hardware needs or view our entire collection of custom hardware at www.martinpierce.com.

Pantone announces 2015 Color of the year

Those involved in the interior design and fashion world eagerly await an announcement by color experts, Pantone, of the color of the year.  This year they caught everyone who was expecting some shade of blue off guard by selecting Marsala as the 2015 Pantone Color of the Year. Pantone Color of the Year 2015 Marsala

According to the executive director of Pantone Color Institute, Leatrice Eiseman, "Marsala is a subtly seductive shade, one that draws us in to its embracing warmth...nurturing and fulfilling."

While this color is as rich and delicious as the wine it is named after, it is also a versatile shade that will be right at home in any room in your home from the kitchen to the bath to the bedroom or will warm up the lobby and guest rooms of a boutique hotel.  It is easily paired with most colors and will complement all types of wood and metal used in the space.  Hospitality and residential designers alike will find many uses for this new color.

In the kitchen

A crisp and clean contemporary kitchen with Marsala walls, small appliances or fabric provide the perfect backdrop for stainless steel hardware.

Ergo wave pull in stainless steel finish Martin Pierce Hardware

 

In the bath

Whether it is in a beautiful spa bath at home or a luxury hotel retreat, the beauty of bronze or high polished brass fixtures, hardware and bath accessories make a striking combination when paired with richly hued Marsala linens and paint in a more traditional setting.

Hedgerow soap dish by Martin Pierce Hardware

On the exterior

Add a punch to the entry by painting the door with this new color and using oil rubbed bronze hardware for a warm greeting to guest or clients.

Solid bronze door lever from Grapevine collection at Martin Pierce Custom Hardware

 

How will you use this latest color trend in your upcoming projects?

You can view our entire collection of custom hardware at www.martinpierce.com.

Ada compliant contemporary hardware designs

Stainless Ergo Front door lock from Martin Pierce Custom Hardware ADA compliant Many of today's designers and architects are seeking door and cabinet hardware for hotels, spas, nightclubs and commercial buildings that are not only attractive but that also comply with strict ADA building codes.  In other words, hardware that is easy to grasp and operate for those who may have some physical limitations. This might be necessary in brand new construction or in a retrofit situation.  This is difficult enough without adding the additional requirement of good looks.

As the population continues to age and, in this very competitive market, it is important that buildings be designed to allow easy access to all who wish to enter.  After all, a businessman does not want to deter someone who might have difficulty gaining entrance and/or navigating the building from entering and conducting their business.  More importantly, consumers need to be able to gain access to their home, their doctor's offices or retail shops.

We are pleased that our Ergo collection of custom hardware meets these demanding standards.  The lever design of our entry and passageway pieces are easy to operate and create a stunning look that will please any lover of contemporary design. Several of our collections, including Morphic, can, upon request, also be adapted to meet ADA standards. This might include lever style handles in place of knobs and pulls that do not require a strong grasp in order to easily operate them.

If you are in the market for door hardware with a crisp and contemporary look and that is ADA compliant or would like to view our entire collection of custom hardware, please visit our site at www.martinpierce.com.

Add color to your custom hardware

color wheel  

Most of us are familiar with and expect oil rubbed bronze, stainless steel, nickel and brass finish choices when it comes time to select door and cabinet hardware.  But we are here to tell you that you can add color to your hardware.

Adding a specific color will not only add interest but it can offer other positive influences. For example, hospitality designers will appreciate the ability to incorporate a client's specific brand color to a project's hardware, thereby highlighting the brand.  If the hardware selection incorporates design features such as floral motifs, animals, bugs etc., adding color will allow these patterns to really "pop".  Our lizard pull shown below is a fine example of the impact color can have on custom hardware.

hot patina color added to lizard pull and available at myknobs.com via pinterest

A subtle introduction of color can also have a big impact.  The effect is seen in the color we added to our Morphic cylindrical entryway pulls and debuted at this year's HD Expo in Las Vegas.  The cutout design offers the perfect opportunity to add color to this sleek and contemporary collection of custom hardware.

Morphic cylindrical pull with a hot orange powder coated accent from Martin Pierce Hardware

Is there a place in your next project for some color?  If so, please visit our site at www.martinpierce.com to view our entire collection of architectural hardware.

Fine examples of modernisme mosaic

A few weeks ago we traveled to Spain with the specific goal of visiting many of Antoni Gaudi's works. Along the way we stumbled upon the works of another great name from the Modernisme period, Montaner.  We share parts of our story here. One of the more remarkable aspects of the work of these two geniuses is their use of mosaic tile.  But not just any mosaic tile...in lieu of the more expected symmetrically cut glass, they both incorporate broken tile pieces into their designs.  These irregular pieces of tile and glass give their work an organic edge that we find so interesting and appealing, especially when juxtaposed with the exposed brick and ironwork of the buildings they design.

In this photo you can clearly see the mosaic pattern in the red background.

martin pierce montaner broken tile sample from barcelona

 

 

martin pierce montaner ceiling light and colorAnd, while this photo does not do justice to this remarkable domed ceiling, it does give you an idea of what to expect from Montaner i.e. exposed iron supports and curvilinear shapes as seen in the various patterns.

As we have shared, Martin Pierce continues to be inspired by the work of these two gentlemen as well as the Art Nouveau and other early 20th century art and architecture movements.  Following this very inspirational vacation I am looking forward to what the future holds for our custom hardware designs and sculpture.

For some inspiration of your own, please visit our site at www.martinpierce.com to view our entire collection of architectural hardware.

 

Montaner treasures in Barcelona

The first few weeks of October found us experiencing the vacation of a lifetime in Spain with the first half of this remarkable trip spent in Barcelona. We traveled to Barcelona in homage to architect Antoni Gaudi who's modernist art nouveau style continues to inspire and humble Martin. However, before we even saw our first Gaudi treasure we stumbled upon the work of another key architect in Catalan Modernisme,  Domenechi Montaner (1850-1923)

His Palau de la Musica Catalana  was located near where we stayed and we found it by chance. We  were so astounded by the exterior that we signed up for the guided tour and took this video during that visit.

[wpvideo dE2JLFnP]

The building is one of amazing color, texture and light. Decorated with natural themes often in the  form of applied ceramic and glass flowers and leaves, the style is so intense with color, movement and varied mediums that it is  almost like being inside a kaleidoscope.  I fear the impact must be overwhelming to those with subtle palettes. If one looks at the tiered ceramic layers that lead to the stained glass roof one is reminded of the Victorian décor that we recently saw at the Simpson house in Santa Barbara.

Montaner’s style, while not as unrestrained as Gaudi, certainly shares Guadi’s sense of fun and sets both of their works apart from that of their contemporaries.

The Palau was built between 1905 and 1908 but more recently the façade has been extended to include a Petite Palau in 2004. The new addition continues Montaner’s theme of nature but with the clever use of red brick which, ironically, was being built during the same period when Martin began designing his Hedgerow collection.  I say this is ironic as both make reference to tree canopies; in Martin Pierce’s case it is the canopy that forms the grip for the passageway door handle.

Notice the similarity of the leaf motif set against the red brick to that of our Hedgerow Collection

Hedgerow Collection from Martin Pierce Hardware

Hedgerow Collection from Martin Pierce Hardware

 

The cool beauty of stainless steel hardware

We spend a lot of time talking about and sharing our collection of bronze hardware, and for good reason.  This warm metal is very popular because it works with almost any design style and is certain to please both your hospitality and residential clients.  While bronze is popular, stainless steel fixtures can have the same impact on projects, especially those done in a contemporary style. We offer several stainless steel collections but, of course, custom hardware can be cast in the metal of your choice.

Sleek and modern

Our Ergo collection is not only sleek and modern but ergonomically designed to fit the hand comfortably, making it a perfect choice for hospitality and commercial projects.  The unique design is also ADA compliant.

Ergo wave pull in stainless steel finish Martin Pierce Hardware

Texture and color

The architectural hardware pieces in our Morphic collection have a textural quality that is both beautiful and interesting.  A powder coated accent color is an option we debuted at the 2014 HD Expo, giving designers the ability to further customize the pieces for their clients.

Morphic cylindrical pull with a hot orange powder coated accent from Martin Pierce Hardware

Organic

A combination of modern and textural, our appropriately named Texture collection offers a little of both.  The contemporary wave pulls are suitable for both residential and commercial projects, and while the chiseled collection is not cast in stainless as are the other items we have shown, it will add a bit of rustic elegance to any door, drawer or cabinet.

Large rectangular pull from our Textured collection.  Martin Pierce Hardware

Bronze, brass, stainless or your own custom combination of metals---your choice of metal finishes for hardware can add a personalized detail to your next hospitality, residential or commercial project.

You can view our entire collection of stainless steel and other custom hardware items at www.martinpierce.com.