The Design Process for Door Handles

Creating door hardware is a balancing act where artistic inspiration is balanced and refined to meet the practical demands of functionality.

Continuing from last weeks post I want to share some of the initial designs that were submitted to designer Debbie Zylstra for her client’s home in Kailua-Kona. Debbie was in the process of designing a home entertainment center in Koa wood and wanted to incorporate dramatic door pulls for sliding doors. The cabinet was grand in scale at a height of 9’ and the lizard heroic handles were considered as a possibility. These pieces are extremely realistic, and the client wanted something more stylized and original but in the reptile family so, pencil in hand, Martin sketched out the iguanas. Martin designed 2 interlocking iguanas which give the illusion of being 2 different pieces, but which use one iguana that is inverted to create a pair. To get a sense of proportion he then reduced the scale and inserted the design into a scaled drawing of the cabinet. The body and head of both iguanas project out from the cabinet door by 4” and the underside of each projects 1 ½” so that there is enough clearance for the hand to grab either the head or tail of each iguana to slide the pocket door open. The angle of the head, legs and tail were made so that the pair would interlock comfortably but leave sufficient space so that fingers would not be pinched.

Iguana Door Pulls situ.jpg
Iguanas copy.jpg

Below are the original sketches for the first large reptile sculptures that are the central pieces in the Lizard collection. Given their realistic design Martin felt he needed to create a left and right facing lizard so that he could more naturally capture the movement of a pair of lizards. The pair was designed so that the head of the right lizard protrudes beyond the slate back-plate allowing the thumb to then be extended to depress the butterfly thumb piece and thereby release the door latch.

Lizard sketch.jpg