Happy July 4th

We are celebrating the 4th with a long weekend and hope you are able to do the same. Ours will be spent comforting our older dog Iris, who like many dogs finds the noise of fireworks nerve racking. This year she is a little more fortunate as one of the advantages to her mature years is her diminished hearing and with a lot of ambient grey noise from electrical appliances we hope she will not hear the booms from city’s fireworks. For all the dog owners out there we wish you and your dogs a safe stress-free holiday.

To see other dog and cat themed door knobs visit our dog and cat pages.

Scaly breasted munia and Bulbul Sightings Hollywood Hills

In April 2020 we posted our sightings of the Black crested Red-whiskered Bulbul in our garden and this wonderful bird continues to flourish. To our delight this year flowers from our guava tree have been feeding a couple as they build a nest in a fellow birder neighbors tree. One of the few upsides to the pandemic was the time we and other neighbors compared sightings and notes on birds in our Hollywood Hills neighborhood and thanks to one neighbor we have now spotted the Scaly-breasted Munia. The Munia also known as the Spice Finch or Nutmeg Mannikin is a pretty chestnut colored bird with scale like breast feathers and is a gregarious one that tends to be seen in small groups. While we have not noticed this bird until now, it is a well-established non-indigenous species that thrives in sufficient numbers as to be counted on the California State Bird’s List.
As can be seen from the photos here, the Munia is more than happy to eat seeds from a bird feeder and the seed level drops significantly when the flock stop by.

Animal themed door or grand cabinet handle

When we replaced our water starved grass garden with drought resistant vegetation we were concerned that this would reduce the birds who frequent it but the contrary has proven true.
Our prolific honeysuckle and Kangaroo paw plant attracts countless Rufus and Anna Hummingbirds and the magnificent flower of our variegated Agaves attract yellow rumped warblers.
While not as striking in color, our feathered double headed bird door pull does possess drama and texture and is a central piece in our cabinet hardware collection.

Designing for Function - Part 3 Making A Custom Door Handle

In previous posts we have used a stationary pull to illustrate how a custom piece of door hardware is designed for lost wax casting, but what impact does a functional handle with moving parts have? The answer depends on the function and varies depending on whether the design is for a door- knob or lever and whether it is to be used as an entry door set or as a handle set for an interior passageway or privacy (think bathroom) door.

In this post we will use the set lizard passageway set to answer the question.

The passageway set is made up of several components, some are cast but others are either machined in metal or custom made to order by fastener manufacturers like Seastrom.

While the back-plate is a relatively straightforward piece to cast, the levers (left and right) need to be cast with a square hole for the ferrule and spindle which are the components that connect the levers together and that will connect with the latch that depresses and returns the lever. The 2 patterns, one for each lever, need to be machined for a square hole and how you accomplish this will depend on the medium used for the pattern. A ferrule is then added either to the pattern or to the subsequent wax replica. For bronze castings we machine our own proprietary custom ferrules in stainless steel an alloy that bonds with the molten bronze but as it melts at a much higher temperature than bronze does not distort or melt in the process. For steel castings, as a metal ferule would melt, we incorporate the ferrule into the pattern. The ferrule acts like a sleeve to hold the square 8mm spindle and it is machined with a tolerance that allows the spindle to fit tightly. A “C” spring clip is added under pressure to the outer rim of the ferrule, and this holds the lever to the back-plate.

The lever set must also be designed to function with a tubular latch. The spindle passes through a square hole in the latch, a component made by another manufacturer and that has an internal spring that enables the lever to be depressed to retract the latch tongue and which returns the lever to throw the tongue.

Depending on the weight of the lever, an auxiliary spring can be added to the ferrule to assist the latch and help prevent any sagging. The auxiliary spring is made in spring steel and as part of the design process the back-plate pattern is made with a stop which limits the motion of the spring to a 33 to 45 range.

The mechanical demands and therefore cost to create a new one-of-a-kind piece for a client are inherently expensive.

Boxer dog door knobs

Having officially launched our new collection of dog themed door hardware we wanted to share some of the background behind each dog breed.

We have four boxer dogs in our neighborhood with wonderful names, 2 are named Tank and Pistol, they are difficult to tell apart which given they are brothers is not too surprising. The other 2 are rescue boxers named Doctor and Dolly. Dr is a white boxer named after the well- known British show “Dr. Who” the other is named Dolly and as you probably guessed is a nod to Dolly Parton. My neighbor is a long- term fan of boxers and all his dogs have come from Boxer Rescue Los Angeles, a non-profit rescue center funded solely by private donations with a fully staffed kennel facility in the San Fernando Valley.

The creative end result of our neighborhood boxers  is a boxer head door knob set. The door knob exists as a functioning passageway set or can be used as a fixed door knob. The boxer head is also available as a simple door pull, or coat hook or as front door knocker. So far we have 8 breeds of dog but have 2 more on the design board which we hope to add by the end of this year or early part of next year.

All of the dog door knobs are made with the same eye for detail as our other lines of door hardware and made the same way using the lost wax method to create intricately detailed castings.

Different Door Knobs - One Door Set

We often get requests for mixed knob sets for our passageway door sets. If you are familiar with our site and catalogue you will know that the Netsuke collection allows you to mix and match our lizard, frog, rabbit, and bumble bee knobs. What is less obvious but just as creative an invention, is to mix the knobs from our Hedgerow and Willow collections. As all 3 collections have a nature theme, we feel the tree canopies of Hedgerow or the swirling leaf orb of Willow work well with the animals in Netsuke and their textural back-plates. The last image below shows how designer Bonnie J. McIntire paired the willow knob with the bark back-plate from the lizard collection.

A recent order by designer Hillary Zeiss went to the next level for both color and collection mix. The door set was created using a pea green frog on one side with a blue green (vert gris) lizard on the other. The door set also had a dead bolt lock activated by using our beetle turn piece and this was also patinaed blue green.

An eclectic group of cabinet pulls were included in the order with fiddlehead ferns finished blue green to match the lizard knob and with a dragonfly, frog and gecko finished in a simple but complimentary light antique oil-rubbed patina.

The blue and blue patinas were made with varying intensities and applications of acetic acid applied to the surface of the bronze heated to 180 to 100 degrees. We use various commercially available concentrates to expedite the oxidation of the surface molecules and halt the process by sealing with wax to prevent a further chemical reaction. The light antique patina on the cabinet pulls was achieved with a cold application of a commercially made selenic acid, once the desired depth of color was achieved the piece was wiped with a wet rag before being sealed.

The swirling leaves of the willow knob paired with the bark back-plate from the lizard collection.

Animal and floral unique cabinet pulls

Our new cabinet pull website section makes plain the theme-based nature of Martin Pierce’s designs. For door hardware, after the initial design concept, the direction of each collection was dictated by functionality with each style needing to work as entry way handles, passageway levers and privacy levers and door knob sets. Cabinet pulls and knobs all perform the same function to open and close cabinet drawers and doors and this simple dictate allows for greater design freedom and whimsy.
Bamboo dresser pulls
All of our cabinet or dresser pulls are made to order as we are a limited production company and are very hands on, thus ensuring the high quality of each piece. The same does not hold true for the bamboo plant that was used to model the cabinet pull shown below. We are in the process of trying to eradicate this very resilient and invasive plant that regretfully was planted as a border plant and now threatens to extend its domain to include our entire garden. So, if you love the look of bamboo consider a more limited production version.

Orchid kitchen cabinet pull
In contrast to our bamboo plant our orchids are not very hardy and very selective as to when they flower and this may explain why we are so drawn to their beauty. Modelled on the orchids on display at the conservatory in the Huntington gardens a place worth visiting for it’s rich variety of tropical plants and trees.

Why research and development for custom hardware is expensive

The old and new schools for creating patterns and molds - part 2

Your design skill set and your preference for digital versus free hand designing may influence your choice when it comes to deciding how to create the pattern or file for casting.
Whichever road you take the research and development (R&D) costs will be significant. The R&D costs are often misunderstood, and many consumers have a hard time accepting that the pattern development can run into the thousands depending on the size and intricacy of the design. This cost is on top of the cost incurred in the design process (part 1), so perhaps we are stating the obvious when we state that custom, one of a kind door hardware, is inherently expensive.

Choice of medium for pattern making.

Regardless of whether the design is digital or old school and made with pencil and paper you should be able to use the same mediums when creating your pattern for use in investment casting or sand castings. If you have the budget and are developing a piece for high volume production, then die casting or 3D printing may be good options and may not require a pattern to be made. While die casting and 3D printing do not require a physical pattern, they depend on the design to be made with CAD/CAM software or comparable software that can capture the exact measurements and topography details of your design so that a virtual pattern can be created.


Mediums for Physical Patterns

The pattern for investment casting can be made from any medium that is both strong and non-permeable or that can be made strong by firing in a kiln. Your choice of medium will depend on your manual skills, can you carve or create a design in modelling clay? The choice will also depend on how dense the detail and undercuts are in your design, does the design have a lot of detail or is the design for a smooth piece with the detail confined to the edges? Our patterns are always made in a reductive way by carving or machining rather than by the additive clay modelling method.

Left cast trumpet flower Right hard blue wax pattern with gate in red wax

Mediums for carving or machining

Rigged foam –
High density rigid polyurethane foam comes in a variety of sheet sizes, thickness, and density. We typically use a medium 15lb per ft density. It can be machined on a bandsaw, turned on a lathe or used with cutting routers. It is ideal for moderately detailed patterns but it’s lack of tensile strength and brittle nature make it less useful for very detailed or large patterns.

Basswood & other woods
Basswood is stronger than rigged foam and finer details such as leaf ends or fingers tips that would be to fragile and brittle if rendered in foam are easy to create in this close-grained soft wood. Patterns created in basswood and foam need to be sealed with a paint primer or other non-permeable layer that act as a barrier to protect the pattern from liquid damage that may occur during mold making.

Blue jewelers’ wax
There are many types of wax available in block and sheet form that can be machined or carved to create a pattern, but we typically use a blue hard wax and pattern making.

Bronze or Stainless Steel Closet Door Pulls - making the right choice

We are always very grateful when clients share photos of our work installed in their homes  as we get to glimpse there use in real life. It can be a daunting task when choosing both the right style and the right alloy for a cabinet or closet door and the internet only helps if the user is savvy when searching the web and has a clear of what they like.

As a small company with limited advertising dollars we rely on the skill and tenacity of  consumers when searching for our products on the web. A recent search brought our work to the attention of a couple in the San Francisco area who were remodeling their master bathroom and bedroom.  

Original photograph courtesy of client

Both rooms were remodeled with contemporary clean lined cabinetry that would work equally well with the Ergo and Morphic styles. The client’s bathroom cabinets were made in teak a warmly colored and figured hard wood that worked well with the brown golden tones of the lightly patinaed bronze they chose as the finish for the Morphic cabinet handles. 

 A two- tone luster was selected for the Ergo stainless steel handles with polished and satin areas a finish that complimented the simple and neutral grey tones of the closet doors.  

Original photograph courtesy of client

Custom Designed Door Hardware some common misunderstandings

During the Covid lock down and after weeks of cooking and reading many turned their energies to drawing designs on their mobile devices and in their sketch pads.

This explains why there has been a flood of emails from consumers and the occasional designer who have an idea for a custom door handle they would like made. In the next few posts, I will be tackling the progressive stages involved from taking a design idea to creating a functional door handle or door pull. These 2 types of hardware are not synonymous as a door handle needs to be designed and engineered so that the knob or lever parts can turn and latch whereas a door pull has no moving parts.

So, let’s begin with the design process and see what needs to be considered.

One design still on the drawing board

Martin Pierce is constantly drawing ideas for door pulls and these typically start with a doodle or sketch done old style with a pencil and sketch book. Many of you will be equally skilled using your mobile device to create a digital drawing and we can consider these provided they are either pdf or jpegs. Regardless of medium the sketch will only be useful if it includes a profile or side view that shows the shape and curvature of the piece and whether it is suitable to work as a grip or pull for your hand (see the palm tree design above) . If you can’t visualize and accurately draw the profile, then it is time for you to re-think your hobbies. However, if you think your design does have potential then please make sure to copyright it even if this is the home version of mailing yourself a copy noting the date and with your signature.

For the ambitious who set out to design a handle they must also design the rose or back-plate. If the handle is to be fixed, then the task is easier as the rose/plate simply must be wide enough to be fastened to the door with screws that will attach both the rose and the knob or lever that will be welded to it. The back-plate and knob/lever are separate castings, and I will explain in a subsequent post why they cannot be created as one casting as well as what additional design drawings are required for a functional door set.

The scale and dimensions of your handle need to be added to your design including the depth for your profile. The depth or thickness of your design will have a direct impact on the weight of the cast handle. The heavier the piece the higher the cost as more bronze or stainless steel will be used in casting.

Making a door handle black - patination versus powder coating

Alloys like steel and bronze can be colored by immersion in a chemical patina such as the M20 chemical from Birchwood which is suitable for bronze or by baking on a layer of pigment powder to the surface of the handle. Neither method is superior to the other, but both have different benefits.

316 Stainless steel is better suited to powder coating as this type of steel is hard, dense and corrosion resistant making it difficult for chemicals to penetrate or to form a chemical bond with. Our Morphic and Ergo collections are typically cast in 316 stainless steel an alloy that lends itself to contemporary door handle designs.
Copper is the primary metal in bronze, and it will readily react and oxidize when exposed to acidic chemicals to form a new micro thin layer. The color that develops through this conversion of copper will depend on the chemicals used and the colors can range from blue greens to red browns to black.  To create black, we use M20 a product made by Birchwood Technologies and one that contains selenious acid which is the component that oxidizes the copper turning it brown or black depending on the number of applications and length of each treatment. As the depth of color can be built up over several immersions it is method well suited to a patina where you want a range of color and a more organic appearance. As the patina is micro-thin several layers can be built up and then sanded back to reveal a range of color. If a uniform effect is wanted then the handle can be immersed in a bath of this solution several times to develop an even color of the required darkness.

By comparison powder coating works well on 316 stainless steel as the pigmented layer is baked on to the surface of the piece and no penetration of the surface occurs. Powder coating offers a wider and more controllable range of color and luster with a wide range of standard colors and custom mixes available from companies like Prismatic who offer a choice of over 6,000 colors. https://www.prismaticpowders.com

Customizing a cabinet pull for a remodeled room

Occasionally I receive a call or email from a person looking for a cabinet pull to cover the holes that were unwittingly revealed when their kitchen or bathroom was remodeled.

 Our cabinet pulls are grouped by style in categories ranging from flying creatures to floral works to contemporary and futuristic pulls which can make it difficult when someone is looking for something merely to cover exposed holes. 

 The pages that were recently added to the cabinet hardware section of our site provide the center- to -center distance as part of the dimensional description and as a greyscale diagram making it easier to review which pieces will work or could be modified to work.

The mounting posts are inset from the top and bottom of the pull and their precise location depends on the style, weight and surface area of the pull.  As our work is made using the lost wax process some amount of customization is possible.

The mounting posts on the original pattern also act as gates through which wax and subsequently molten metal will flow. If the new center to center dimension is a little further or closer than our pattern we can modify the wax version and cut and re-position the posts so that their location will correspond to the existing holes of the cabinet. Such modifications are time consuming, and we would recommend a new pattern and mold be made for larger quantities.

A touch of color in time for Easter

As Easter approaches we wish you all a merry time and if you are lucky enough to live in Los Angeles then we hope you too will enjoy the wonderful warm days that are upon us.

The arrival of Spring has seen the arrival of colorful orders at Martin Pierce Hardware, and we wanted to share these lovely pieces with you.

The order shown here is an interesting collection of branch and flying insects all finished with an amber hot patina, applied by hand and at a safe arm’s length from the blow torch used to heat the bronze.

If you look closely you will see that the small butterflies also have dot eye markings on their wings a characteristic of many butterflies possibly used to attract a mate or deter a predator.

We have recently updated our website to show our unusual cabinet pulls form different perspectives and in 2 different finishes. The hot amber patina is available as a special-order patina.

All these pieces can be seen in our revised cabinet pull web pages and in our new digital catalogue.

Slim but Strong – using Cabinet Pulls for Closet Doors

The Ergo 12” cabinet pull is a slim curvaceous and very strong piece that belies its delicate features. It is cast either in 316 stainless steel or silicon bronze and both alloys perform well in terms of tensile strength. In other posts I have described how the chemistry of each, and the method of manufacturing impacts the strength, corrosion resistance and malleability of each alloy.
Tensile strength is measured in terms of yield strength and ultimate strength. The former indicates the metals’ ability to be stressed to the point where it is distorted or does not return to its original cast shape. Ultimate strength refers to the breaking point of a metal (see footnotes at the end of this post).
Recently the Ergo cabinet pull has been specified for use on closet doors and the customer needed reassurance that the pull was strong enough to act as a door pull. To demonstrate this, I used a heavy display board laden with several pieces and weighing a total of 40lbs and easily lifted it using the Ergo pull.

While an alloys strength is important if a pull is to be used for a heavy door it is worth noting that the hinges of the door take the brunt of the heavy lifting and their number and strength will have a greater bearing on the pull’s performance.

The scale of a cabinet pull is equally important when assessing its suitability as a door pull. The closet doors in this instance were double doors each measuring 18” W by 90”H so worked well with a 12” pull.

Step by Step process till a sophisticated 2 tone gem is created;

1. Red Wax Replicas made in a rubber mold for every pull one wax will be made; each will be shelled then invested with 316 stainless steel

2. Once cast the pieces are ground to remove the gates, the pieces are cleaned and then each is polished on all sides

3. Top photo if you zoom in you will see how the pull is masked with blue tape - once in place the piece is sand polished with a fine grit of sand to create a satin finish. The end result is a 2 tone polished-satin finish.

To learn more about how metals vary in tensile strength.

Grand Entry Doors - Using Cremone Bolts to Secure Tall Doors

The Heroic Hedgerow door grip as is clear from its name is a substantial piece whose size, detail and beauty make it a perfect choice for large scaled single or double entry doors. For security, we recommend a mortise lock and use the American made Accurate mortise lock, an industry leader known for their superior locks. The lock is incorporated using an unobtrusive rose and a keyed mortise deadbolt whose size does not detract from the dramatic tree grips.

Large double doors can be made even more secure with a rod bolt that when engaged locks the door into the header and threshold. These types of bolt are often referred to as Cremone bolts or Espagnolettes and they have been used for centuries. The less mechanized form of this bolt is available for our Willow collection. We are currently developing a mechanized and long form of this bolt for both the Willow and Hedgerow collections.

Our motivation to extend the Cremone bolt collection stems from the limitations of the multi-point lock which is the modern-day equivalent to the Espagnolettes. Multi-point locks are designed to be concealed within the door stile and usually function with an exterior lever. Door levers are necessarily small in scale as they need to be easy to grip and depress by even the smallest of hands. The escutcheon needs to be proportional to the lever and the result is a handle set that is overshadowed by the door. Some multi-point locks use a knob to activate the lock but again the scale of this is inappropriate for larger doors. While certain manufacturers appear to offer a multi-point grip.

Cabinet pulls undergo website re-model

It’s official, we have completed the remodel of the cabinet pull section of our website and hope that you will enjoy the new look and details.
Why the changes?
We have re-photographed our work in-house with the use of a light-box and a Canon EOS Rebel 35mm camera to better capture the detailed nature of our castings and to show that these fine details are not limited to one facet but are on all facets of each piece.
By showing different perspectives we hope to encourage customers to think outside the usual horizontal and vertical placement of pulls and consider different angles and directions for a more creative arrangement. Since our work is often described as whimsical customers should have some fun when facing the daunting task of planning their new home or remodel.

We hope we have made the task of pull placement easier with our black and white diagrams that show the width, height, depth and distance between mounting screws for each pull. The diagrams also show the distance between different points on a given line thereby removing some of the stress when figuring out the difference in meaning of “depth” versus “height” and “length”.

The new web pages also show the difference in appearance between our popular light and dark oil rubbed finishes. We still offer nickel plating and colored hot patinas so please contact us to discuss other finish options.
The images and diagrams have been complied in a new digital pdf that can be downloaded from each of the new pages or downloaded below.

Using Wax Facsimiles to Create Bronze Door Handles

Manufacturing artistic bronze handles in the investment method of casting is an inherently labor intensive process. Every decorative aspect of the door set has to be created in wax. A single door set requires a minimum of 4 wax patterns 2 for the left and right levers and 2 for the backplates. Some levers and knobs require 2 wax patterns to be poured as separate waxes and later fused together to create one complete wax pattern.
The Hedgerow lever is extremely detailed requiring 2 molds one for the tree canopy and one for each of the left and right facing tree branches. The canopy and tree branches are melded together using a small heated pen blade, the edge of each wax is gently melted and the two are pressed together to form a tight bond.

A metal spindle is used to connect the 2 levers of a door set and to accommodate this we have to create a small cavity in the end of the wax lever. We either add the shape of the ferrule to the pattern so that this detail becomes part of the wax facsimile or we add a separate ferrule that is machined in steel. In either case to preserve the ferrule shape and to prevent the cavity from subsequently filling-up with silica slurry a tightly fitting ceramic core is place inside the ferrule before the wax pieces are shelled.

To see the end result visit Willow

The final casting is shown below and is part of a complete collection of tree-inspired designs

Seagulls and Bears – unusual Hollywood neighbors

Unlike much of the country winter in Hollywood is usually warm and sunny making it a good time to enjoy a long walk to the historical Lake Hollywood aka the Mulholland dam.

Spending more time at my home-office I have become aware of the variety of birds who visit ranging from the melodious bulbuls and song sparrows to the deep throated sonorous crows and ravens. While seagulls may not be gifted with such distinctive voices, they make up for this with their sheer numbers and easy to follow daily trajectory to the small lake nestled below the Hollywood sign.

Hundreds of Seagulls resting in the morning sun on Lake Hollywood

The Mulholland Dam was constructed as a reservoir in the 1920’s and was named after the historical legend who is associated with its beleaguered history. The dam was almost identical in design to the St. Francis dam that sadly collapsed and killed hundreds of residents in the area we now know as Valencia or Santa Clarita. The St. Francis tragedy caused a public outcry and demands that the new dam be scrapped. As an alternative the water level of the dam was permanently limited to well below design capacity and the area south of the buttress was backfilled with vast amounts of soil and vegetation that now conceal the damns presence. The result over 90 years later is that dam no longer functions as a reservoir but as a lake that is home to thousands of seagulls and other water birds. The area south of the lake has beautifully matured with native shrubs and tall pines all guarded by a row of bear gargoyles in honor of our state residents.

 To see examples of how birds inspire our work.

Swallow cabinet pull

https://www.martinpierce.com/unusual-cabinet-pulls-insect-collection

To read more about the history of Lake Hollywood please visit:

https://la.curbed.com/2019/2/5/17434640/william-mulholland-dam-collapse-water-los-angeles-history

https://waterandpower.org/museum/Mulholland_Dam_and_Hollywood_Reservoir.html

New Developments Dog Door Knobs

New Developments – Dog Door Knobs

This year we will be launching an unusual collection of door knobs inspired by our dog Iris and by other canines plus a few cats.

In 2014 Martin sculpted a life size portrait of Iris, our much-loved Pitbull. The portrait took several months to complete, and it is one of the few pieces that we value as a wood sculpture and have no plans to portray Iris as a full-scale bronze. Many of our friends and neighbors are dog owners and the idea of creating a series of dog handles began to take shape.

For details on how Martin sculpted Iris

Martin began the series by sketching some of the common breeds we see on our daily Iris walks. We live in Beachwood Canyon, a neighborhood in Los Angeles that has a lot of dog lovers so finding suitable subjects was easy but deciding on which to include was not. We also have friends who are equally smitten by their cats so decided to include a few cats.

The new collection when launched will include 8 dog and 4 cat breeds. I use the word breed very loosely as the aim of the series is to represent the general head characteristics associated with each breed as artistically interpreted by Martin. The collection in deference to their numbers and good looks will also include a fluffy mutt of unknown lineage.  

The dog and cat collections will be available as functional door knob sets, door knockers, or as clothing or leash hooks and door pulls.

Monumental Dragonflies and Butterflies

Elizabeth Locker has shared with us pictures of her beautifully designed monument that artistically incorporates free spirited dragonflies from our animal collection of cabinet pulls.

Residents of Ohio will be familiar with Elizabeth Locker and Jason Hess, owners of Modern Monument a company that specializes in creating original and highly artistic commemorative headstones. Working with in-house stone masons and artisans they  offer  a wide range of inscribed designs that include animal and bird themes,  musical motifs  and sports and outdoor themes. Our cabinet pulls are usually attached by bolting a machine screw through the back of a cabinet door and then screwing the threaded end into the hole at the back of the pull. The dragonfly has one central mounting post with a small base making it nearly impossible to surface mount.

Photograph courtesy of Elizabeth Locker, Modern Monument

When asked to make the dragonflies for headstone Elizabeth requested that they be secure and not able to be easily removed and that they be finished with a patina that would age well.

To make the pull secure we welded a bronze flange onto the base making the area wide enough to take 2 screws. The screws were cemented with an epoxy resin into the base and the screw heads were cut off. Two holes were then drilled into the headstone and the dragonfly was then secured in place with epoxy.
As our bronze pieces are typically oil rubbed they naturally develop a living patina and over time will darken and age elegantly.

The monument design has inspired a second commission from Elizabeth, this time she will be artistically placing our large butterfly as well as 2 dragonflies.

Back-to-Back Mirrored Door Handles

The Heroic Vine is a very organic piece and is not symmetrical but slightly asymmetric meaning the top and bottom are different and the front and back faces also are slightly different.
Two of these were ordered as a set to be mounted back-to-back on a glass door panel and the client requested that they be “mirrored”.

This raised an interesting question and in answering I was faced with a mind teaser that took me down Alice’s rabbit hole into the world of symmetry.

When we describe 2 images as being mirrored, we are stating that the one image is a reverse of the other and we can flip the image in a program like Photoshop to achieve this. While this is easy to do with a flat or 2-dimensional image this can only be achieved with a 3-dimensional object if is completely symmetric as would be case in a perfectly spherical orb or cylindrical tube. In both cases one can turn the object on its head, rotate it etc. and we will always be viewing the “face”.

This is not the case with any of the door pulls we make as we do not make any that are plain tubes or orbs. However, we can still create a mirrored set provided one face of the handle is symmetrical and the design at the top is the mirror image of the design at the bottom. The Morphic Serpentine handle is a good example with the top lacey pattern bending to the right and the bottom bending to the left.

If the handle design is not symmetrical, we can only create a truly mirrored set if we have a left and right facing design as is the case with our Hedgerow heroic tree handles.

The Grapevine heroic handle is not symmetrical and not directional. The “front” of the handle is different to the “back” as is the “top” to the “bottom”. As a set and when mounted back-to-back on glass they are best described as an organic mirror of each other.